elitegrips Golf Grips TD50 set Berlina Black No backline 13-piece

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ----------------------------------------------------------------------

Size: M58, M60, M62 caliber compatible Color: SW/BB/CR/NB Material: No. NK510 special synthetic rubber material (with silica) Brand: Elite Grips Grip length: 275mm Thickness when M60 shaft is attached 2 inches from grip end: 22.8mm 5 inches from grip end: 21.3mm Weight With back line: 49.5g ±1g Without back line: 48.5g ±1g TD50 Product Features TD50 is a grip made with Japan's world-class technology. The surface pattern is a honeycomb structure of "Y x 2 + 1". Honeycomb structures are widely used in aircraft and architecture, and are designed to be highly rigid and resistant to twisting. This groove is cut down to 0.6 mm and carved at a 45-degree angle to the Z direction of the mold surface using Japan's latest technology. This allows the groove to be carved at a 90-degree angle, which firmly bites into the hand and successfully increases grip strength. This is possible only with advanced mold technology. The TD50, which has a firm rigidity despite its softness, is used by many tour professionals. This grip is recommended for players who catch the ball too much because of the small taper, and for players who want to grip it firmly and swing. Grip that is resistant to rain and sweat The TD50 grip is made of a resin material called "No. NK510". This material does not absorb water, so even if the grip gets wet from rain or sweat, you can wipe the grip and your hands with a dry towel and still achieve high performance. However, since it is impermeable to both water and air, care must be taken with the solvent and tape used when attaching the grip. Depending on the compatibility of the solvent and double-sided tape, the grip may not be fixed even after time has passed and may move. Elite Grip recommends: - Elite Grip Grip Replacement Solvent "Quick One Pro" - NCA Buffalo Double-Sided Tape Quick One Pro is a replacement solvent used by actual professional support at tournament venues, and because it is highly volatile, it takes less time to dry and prevents loosening. The TD50 is a grip made using Japan's world-class technology. The surface pattern is a "Y×2+1" honeycomb structure. The honeycomb structure is a structure that is widely used in aircraft and architecture, and is designed to be highly rigid and resistant to twisting. This groove is machined to 0.6 mm and carved at a 45 degree angle to the Z direction of the mold surface using Japan's most cutting-edge technology. This allows the grooves to be carved at a 90-degree angle, which grips firmly into the hand and increases grip strength. This is possible only because of our advanced mold technology. The TD50 is soft yet sturdy, and is used by many tour professionals. This grip has a smaller taper and is recommended for players who tend to catch the ball too much, and for players who want to hold the ball firmly and swing.