Descrizione
●㋱6,050●JAN code: 4549092004443 ●Product number: GPB-FK2.1-GY● Size: Width 24.5 x Depth 18 x Height 19 cm, ●Capacity: (Full water capacity 2.1 L, Reference practical quantity: 1.3L), ●Material: Steel plate for enameling, Knob/Handle/Whistle: Phenolic resin ●Country of origin: Thailand ●*This product is planned and supervised by Good Faith Co., Ltd. and manufactured at our Thai factory under strict quality control based on Japanese standards. ●The [Good Plus] bespoke [Cotton] series has a beautiful luster unique to enamel. ●Collaboration with Japan's long-established enamel maker "Fuji Enamel". ●Special specification with the [GoodPlus+] logo engraved by laser on the lid knob. ●A simple Scandinavian style whistle kettle. A whistle will notify you when the water is boiling. ● [Compatible with all IH heat sources] ● Enamel products have an iron body covered with a glass membrane. ●[Do not use tableware dryer] ●Enamel is resistant to acid and salt, is resistant to rust, and does not easily transmit odors. ⚠️ [Frequently Asked Questions and Quality Precautions] ●Please rest assured that the black-looking part on the edge of the enamel product is not a quality defect such as chipping or peeling. ●[Good Plus] enamel kitchenware is coated with enamel on the inside, outside, and edges. ●Only the inside of the kettle has a dark blue enamel coating that is different in color from the main body, but it has the same enamel ingredients as the main body. ● Also, on the edges of the product, such as the spout of a kettle, the handle attachment of a one-handed pot, or the edge of a storage container, you will see sparse black parts that differ from the enamel color of the main body, but these black parts are the underlying enamel coating. ●Since the enamel coating on kitchenware is not a paint job, it is difficult for the enamel to settle on top of the enamel base on the edges, and there are some areas where the black enamel base is visible, but don't worry as the enamel is coated securely. ⚠️Reference practical water volume is 1.3 liters. If you boil it higher than this, water may gush out from the spout and the whistle may not sound. To ensure that the whistle sounds properly, close the lid tightly and drain the whistle thoroughly before boiling water. The whistle will not sound even if the water is too low. ●㋱6,050●JAN code: 4549092004443 ●Product number: GPB-FK2.1-GY● Size: Width 24.5 x Depth 18 x Height 19 cm, ●Capacity: 2.1L , ●Material: Steel plate for enameling, Knob/Handle/Whistle: Phenol resin ●Country of origin: Thailand ●*This product is planned and supervised by Good Faith Co., Ltd. and manufactured at our Thai factory under strict quality control based on Japanese standards. ●The [Good Plus] bespoke [Cotton] series has a beautiful luster unique to enamel. ●Collaboration with Japan's long-established enamel maker "Fuji Enamel". ●Special specification with the [GoodPlus+] logo engraved by laser on the lid knob. ●A simple Scandinavian style whistle kettle. A whistle will notify you when the water is boiling. ● [Compatible with all IH heat sources] ● Enamel products have an iron body covered with a glass membrane. ●[Do not use dish dryer] ●Enamel is resistant to acid and salt, is resistant to rust, and does not easily transmit odors. ⚠️ [Frequently Asked Questions and Quality Precautions] ●The black-looking part on the edge of the enamel product is not a quality defect such as chipping or peeling, so please rest assured. Please be considerate. ●[Good Plus] enamel kitchenware is coated with enamel on the inside, outside, and edges. ●Only the inside of the kettle has a dark blue enamel coating that is different in color from the main body, but it has the same enamel ingredients as the main body. ● Also, on the edges of the product, such as the spout of a kettle, the handle attachment of a one-handed pot, or the edge of a storage container, you will see sparse black parts that differ from the enamel color of the main body, but these black parts are the underlying enamel coating. ●Since the enamel coating on kitchenware is not a paint job, it is difficult for the enamel to settle on top of the enamel base on the edges, and there are some areas where the black enamel base is visible, but don't worry as the enamel is coated securely.
