[Product Description] A jewelry-like shine that can be mistaken for a gemstone, and a non-slip coating for a perfect fit. This is the industry's first corrosion-resistant, dust-proof, simple waterproof, salt-resistant, high-precision knob. Furthermore, it is compatible with most manufacturers' handles, and the new standard easy setting includes everything from bearings to installation tools, making it easy to set up even for those who are not good at installation. [Product Overview] Accessories: Corrosion-resistant stainless steel bearings, dedicated shims and color parts for each reel manufacturer, disc installation tools Applicable reels: Daiwa, Shimano (current stepped type), Brave, Rodeo Craft, Funnel, etc. Type: Thick normal type A / Thin slim type B [Please read before installation] Akrista is made of delicate acrylic resin. Therefore, the surface is easily scratched, so please handle with care. In addition, it is strictly prohibited to apply organic solvents such as parts cleaners as they may cause symptoms such as clouding of the surface. If the surface becomes cloudy, wipe it dry with a dry cloth. This product is a knob that is designed with durability in mind and features a dustproof seal that provides simple waterproofing. However, this is only a simple waterproofing and is not completely waterproof.
It is not. When attached, the knob will be heavier to turn than a normal knob. If you want the knob to rotate, remove the shield. In that case, the durability will be the same as a conventional handle knob. When installing the included screws, please use the included disk wrench. A normal screwdriver will scratch or break the screws. When installing, basically use IOS-02 for all parts. Also, if you want rotation, please use IOS-01. If you are particularly concerned about durability, please use IOS gear grease. 1. Use the included dedicated disk wrench to install the screws. Commercially available screwdrivers cannot be used. After tightening firmly, be sure to move the knob body back and forth to check that the clearance is adjusted again. 2. If the handle is loose, add the included 0.1mm shim. Normally the recommended setting is OK. 3. If the knob does not turn even after tightening the screw, remove one 0.1mm shim. Normally the recommended setting is OK.
