Binaural Caribbean Blue 3M Littmann Stethoscope Replacement Part for Master Classic II and Classic III (5623, 2630)

Coolbe: מוצר זה הוא מכשיר רפואי שיש להשתמש בו רק כמתוכנן ובהתאם להוראות השימוש. מכשיר זה אינו מהווה תחליף לייעוץ רפואי מקצועי, אבחון או טיפול. יש להיתייעץ עם גורם רפואי מוסמך לפני השימוש במקרה של ספק. המוכר/מפיץ אינו אחראי לכל נזק הנובע משימוש לרעה, שינוי לא מורשה או שימוש מעבר לאינדיקציות המוצהרות.

-----

--------------------------------------------------- 【Voltage Compatibility】 Our products are selected to support international voltage ranges (e.g. 100–240V). However, please make sure your local voltage is compatible before use, as incorrect voltage may still cause malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without appropriate voltage or equipment. --------------------------------------------------- This is a part that you should replace when the T-shaped part of the tube breaks or the rubber deteriorates after long-term use. You can easily replace the parts yourself. This is a part that should be replaced when the T-shaped part of the tube breaks or the rubber deteriorates after long-term use. Applicable models: Master Classic 2, Classic 3 ○How to remove the head: Immerse the joint between the head and tube in hot water for 2-3 minutes, and pull it out when the rubber on the tube has softened. (* (*At this time, hold the head and immerse only the part where the tube and head joint overlap into the hot water. (*At this time, hold the head and immerse only the part where the tube and head joint overlap into the hot water.Hold the head and immerse only the part where the tube and head joint overlap into the hot water.At this time, make sure that the head does not get immersed in the hot water. Also, take sufficient care not to get burned.) *Please be careful not to cut or slash with scissors, a cutter or any other sharp object, as this will make it unusable. *The head of a stethoscope is the most expensive part, and its material and shape generally allow it to be used for a long time. By replacing the binaural parts other than the head, you can continue to use the original head for a long time without having to replace the entire stethoscope. If it is the same model, you can attach binaural parts of different colors.