Description:
Features:
LCD screen, display information comprehensively and clearly.
Configuration of intelligent fan, which can dissipate the heat effectively and quietly.
Test various batteries, DC power supply, and charging data lines.
Specification:
Input Interface Output Interface: 100A High Current Bite Screw Stud
Current measurement range: 0.00A ~ 20A, Resolution accuracy: 0.05A
Capacity accumulation range: 0 ~ 999.999Ah, Resolution accuracy: 0.01Ah
Power accumulation range: 0 ~ 9999.9Wh, Resolution accuracy: 0.01Wh
Power measurement range: 0000.00 ~ 2999.99W, Resolution accuracy: 0.01W
Impedance measurement range: 1 ~ 999.9 Ohm , Resolution accuracy: 0.01 Ohm
Temperature measurement range: 0 ~ 99 celsius , Resolution accuracy: 1 celsius
Timing maximum time: 999 hours 59 minutes 59 seconds, Resolution accuracy: 1 second
Timing measurement reminder settings: countdown 24 hours, any value can be set
Small current standby to remind the threshold parameters and timing: <2W 0.5 hours; > 0.5W begin timing
Refresh time: > 500mS times
Measurement rate: about 2 times sec
Overpressure Reminder Setting range: 1 ~ 200V
Overflow Reminder Set Range: 0.2 ~ 100A
Display Type: Micro power LCD Module LCM Green Backlight Chinese & English Display
Operating temperature: 10 ~ +60 celsius
Interface: USB, 5.5mm jack, Mini USB, Micro USB, TypeC
Working humidity: 10 ~ 80
Working pressure: 80 ~ 106kPa
Size: Approx. 156 x 96 x 58mm 6.1 x 3.7 x 2.2inch
Weight: 631g
Note:
1. Please turn down the knob to the end counterclockwise before using, and then turn up slowly.
3. Several tested power supply can not be connected simultaneously.
4. The current adjustment knob should be regulated slowly.
Package Include:
1 x Fan
1 x USB Cable
2 x Crocodile Clip1 x Manual
(Other items in the picture are NOT included)
.
LCD screen, display information comprehensively and clearly.
Configuration of intelligent fan, which can dissipate the heat effectively and quietly.
Load maximum power 150W, max voltage 200V, max current 20A.
Test various batteries, DC power supply, and charging data lines.
Over voltage, over current, and over pressure alarm can protect the module from damage effectively.
