Specification:
Origin: Mainland China
Accessory Type: Cooling Fan
Compatible With: for Raspberry Pi 5
Input Voltage: 5V DC via four-pin fan connector for Raspberry Pi 5
Fan speed control: Pulse width modulation control with tachometer
Maximum airflow: 1.09 CFM
Maximum fan speed: 8000 RPM +/- 15%
Product Material: Pure Copper
Product Size: 63*43*20MM/2.48x1.69x0.79inch
Product Description.
1.The original heat sink for Raspberry Pi 5, the active thermal cooler is a pure copper-aluminium heat sink with integrated blower.
2. If it is desired to use the for Raspberry Pi without an enclosure in order to withstand constant heavy workloads without throttling, an optional active thermal cooler can be added.
3. The blower, also chosen for low noise and extended operating life, pushes air against the finned copper heat sink to cool it down.
Features.
Pure copper heat sink
Heatsink-mounted temperature control fan secured by three screws
Spring loaded push pins for mounting to for Raspberry Pi 5
Pre-coated thermal pads for heat transfer
Customised for Raspberry Pi 5:
Without any heat sink installed on the motherboard, the idle temperature of for Raspberry Pi 5 CPU is about 65°C
Continuous load applied to the CPU when running without cooling causes the maximum temperature to climb above 85°C
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
