Name: 2/2.3/3/3.17/4/5/6mm Motor Shaft Coupling Joint Coupler for RC Boat Car Robot
SKU: 61e762f071e4c0014d63d46d
Price: 19.65 EUR
Availability: InStock
Rating: 4.859649122807017 (57 reviews)

Description

Descriptions: *100% brand new and high quality. *The brass coupling is a through hole connecting two optical axes of different diameters, or connecting motors and an optical axle, or connecting axes of different diameters. *It can be used as either a screw rod or a transmission between the propeller shaft and the motor of a model remote control ship. *Side screw holes are unified as M3. Each coupling is supplied with four screws. *There are many kinds of joint couplers on sold. For example "2mm to 5mm" means the apertures diameter at both ends were 2MM and 5MM respectively. Please choose the correct sizes to purchase. Specifications: *Material: brass *Diameter of both ends of cross section: 9mm *Intermediate diameter of cross section: 7mm *Total length: approx.20mm *Optional sizes: 2mm to 2mm 2mm to 2.3mm 2mm to 3mm 2mm to 3.17mm 2mm to 4mm 2mm to 5mm 2mm to 6mm 2.3mm to 2.3mm 2.3mm to 3mm 2.3mm to 4mm 3mm to 3mm 3mm to 3.17mm 3mm to 4mm 3mm to 5mm 3mm to 6mm 3.17mm to 3.17mm 3.17mm to 4mm 3.17mm to 5mm 4mm to 4mm 4mm to 5mm 4mm to 6mm 5mm to 5mm 5mm to 6mm 6mm to 6mm Package Contents: 1 x brass coupling 4 x screws 1 x wrench Notes: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.

Report an issue

Reviews 57

4.9

Customer

June 16

2mm to 2mm

These little items are perfect. The axle hole is 2mm "clearance", which means that they fit on a 2mm shaft without binding and no "play". They are also of a good quality and really good value for money. I actually ordered these in error since I needed a flexible coupler, but these items have found other uses: I printed a PLA (plastic) fan-blade, but it is difficult to connect a plastic item to a motor with only a short 2mm shaft. Solution? Print the fan with a 9mm centre hole in the hub and you can easily fix this coupler into the centre of the hub of the fan blade with a dab of super-glue. Now my 3D printed fan blade can be connected to the motor with perfect precision, high strength and no limitations with the motor short shaft, or trying to fix a 2mm shaft into plastic. I will buy more of these because I have several other 3D projects that need to be connected to small model motors, including an ornamental wind generator. I am 100% satisfied with my purchases, and also 100% satisfied that they have other uses in model-making. Harry L

Customer

September 25, 2024

3mm to 4mm

Well received thank you joom