Coolbe: Tento produkt je zdravotnický prostředek, který musí být používán pouze k určenému účelu a v souladu s pokyny k použití.
Tento prostředek nenahrazuje odborné lékařské poradenství, diagnózu ani léčbu. V případě pochybností se před použitím poraďte s kvalifikovaným zdravotnickým odborníkem. Prodejce/distributor nenese odpovědnost za škody způsobené nesprávným použitím, neoprávněnými úpravami nebo použitím jiným než podle určeného účelu.
-----
Feature:
1. WRINKLE REDUCTION: The pulse pattern of plasma treatment effectively optimizes and lifts the facial skin, promotes collagen synthesis and reduces facial wrinkles.
2. FRACTIONAL PENETRATION: You can use a fractional plasma probe to enhance the penetration of your facial cosmetics, achieving optimal penetration through the electrical pore effect.
3. IDEAL CHOICE: This beauty pen uses plasma technology for facial treatments and is the perfect aid for pimple removal. With an ergonomic design that allows for a comfortable grip and stable operation.
4. POWER ADJUSTABLE: The plasma pen has 5 types of plasma processing probes, easy to use, and the output power can be adjusted by a wheel with high strength and wide range.
5. PROFESSIONAL PIMPLE TREATMENT: Professional plasma tips for pimples are used to suppress excessive ozone and UV radiation, which providing the right amount of free radicals and UV rays for pimple treatment.
6. USB RECHARGEABLE: This plasma beauty pen is designed with a USB connector that connects to the USB terminal of a pc or laptop for easy charging.
Specification:
Item Type: Plasma pen
Material: ABS
Battery Type: Lithium battery
Battery Capacity: 1000mAh
(shipped with built in battery)
Power Supply Mode: USB charging
Part I:pimple tips, special film
1. Tips installation: Rotate the head cover counterclockwise to loosen it slightly, insert the pimple tip into the collet, and rotate the head cover clockwise to fix it on the collet.
2. Fit the special film and the tip cover: Remove a layer of film from the pimple tip, attach the sticky side of the film to the top of the pimple tip and cover the tip cover.
Note: When laminating the film and covering the tip cover, push it deep enough to expose the needle tip to the cover, as shown in the figure below. Plasma will be generated when the needle tip ring portion of the film is in contact with the skin.
3. Procedure: Set continuous (C) mode and strength to 7~9. Slowly move the needle tip as a circle while pressing the shoot button and touching the pimple area at the same time. When applied to the skin, a circular plasma will form at the tip of the film and release a sufficient amount of free radicals, UV rays and heat to help improve pimple.
Note: Use only the dedicated film, in which case the film is broken and sparks are transferred directly to the skin, causing damage. Dedicated fillers are for disposable use. Repeated use may cause damage to the film.
Part 2:Tips for pimple removal, pimple removal patch
1. Tip Installation: Rotate the head cover counterclockwise to loosen it slightly, insert the pimple head into the chuck, and rotate the head cover clockwise to fix it on the chuck.
Note: If you use the pimple patch, there is no special film to produce plasma, be sure to remove the special film when attached to the tip of the pin.
2. Paste pimple patch: Remove the patch and paste it on the pimple area for treatment. Clean skin before use, do not use toner and lotion. Do not use damaged patches.
3. Procedure: Set continuous (C) mode and strength to 7~9. Slowly move the needle tip as a circle while pressing the shoot button and touching the pimple area at the same time. When applied to the skin, a ringshaped plasma forms at the tip of the film, attaching and releasing sufficient amounts of free radicals, UV rays and heat to help improve pimple. The released plasma also encourages the skin to absorb the ingredients on the pimple patch.
Note: Do not leave the patch area. If the needle tip is in direct contact with the skin, sparks may shoot directly into the skin and cause skin damage.
Part 3:Plasma lifting to improve wrinkles and collagen regeneration.
1. Tips installation: counterclockwise rotation of the head cover to make it slightly loose, insert the lifting head into the chuck, turn the head cover clockwise to fix the top on the chuck.
2. Procedure: Press the shooting button does not work when charging.
Note: When using pulse (P) mode, the output intensity should be within the range of 1~5, do not exceed 5. Pulse mode has a frequency output of 500Hz specifically designed for lifting, so exceeding 5 cycles will cause unnecessary skin irritation.
First, clean the skin before the procedure. Nothing is applied to the skin during the plasma lift. However, if necessary, a primer, high frequency cream, lifting cream, etc. may be applied as appropriate.
Using the tap or brush method, the plasma discharge occurs at the moment of contact with the skin. Therefore, set the appropriate output level according to the application area and usage to prevent unnecessary discharge.
Part 4 Makeup Absorbent, Penetration Tip Section Tips
1. Tapping through the fraction tip: 5 minutes
After installing the fraction tip first, clean the treatment tank and remove the water, set the continuous (C) mode and output strength to 3~5, then move the tip and tap gently.
2. Apply cosmetics: Apply cosmetics evenly.
3. 1st absorption massage penetration tip: 5min After replacing the penetration tip, continuous (C) mode and output intensity 5~7, then move the tip and gently massage.
4. 2st penetration massage head absorption massage, 5min replace the fraction tip, pulse (P) mode, after output intensity 3~5, move the tip and gently tap.
Part 5: Plasma arc, needle
1. Needle tip installation: counterclockwise rotation to remove the cap. Remove the needle tip chuck and then install the needle chuck. Insert the needle tip into the needle clip, and then rotate the head cap clockwise to fix.
2. Operation after selecting "power level".
Select continuous (C) mode and 3~7 levels of output. When the firing button is pressed, place the needle within 1mm of the treatment site and the plasma will be output to the target site.
How to charge.
USB charging, can be connected to PC or laptop with USB terminal for charging..
Package List:
1 x Host1 x USB Data Cable1 x Instruction Manual1 x Small Suction Pipe10 x Silver Fine Needle2 x Golden Straight Needle2 x Golden Crooked Fine Needle1 x Sheet pimple Sticker (8pcs)1 x Pimple Needle1 x Pimple Cover1 x Small Roller Head1 x Medium Flat Round Head1 x Plastic Suction Head1 x Flat Abrasive Head
Note:
1. The general life of a rechargeable battery is 500 times longer than charged and discharged, but it may be reduced depending on operating conditions, temperature or humidity, etc.2. Do not leave it unused for a long time. If it is completely discharged, the battery life will be shortened. After your first use, use it to fully charge. A full charge takes 3 hours, but there is a slight difference depending on the remaining charge.3. The device does not work when charging. For the safety of the user, please do not use it during charging.
