Feature:
1. Automatic Pool Vacuum: Foolproof operation, no need for manual supervision, lightweight body, low voltage, low energy consumption, wireless operation.
2. Product Advantages: The cordless robotic pool cleaner can filter and clean the bottom of the pool without changing the water, and has the advantages of regular path, long endurance, and good cleaning effect.
3. Added Functions: Adding functions such as intelligent side stop and status prompt. When the cleaning machine comes into contact with the pool wall, it will automatically reverse after 4 seconds. When the cleaning machine needs maintenance, the robot will automatically lean on the wall.
4. Charging Reminder Function: When charging, the red light flashes. When the battery is discharged, the green indicator light remains on and the buzzer will sound for 1 minute.
5. Power Switch Function: Press and hold the bottom of the automatic pool vacuum cleaner host (power switch) for 2?3 seconds, and the indicator light, motor, buzzer, and other hardware will self check, indicating that the cleaner is in normal working state. Press and hold the power switch for 2?3 seconds in the power on state to turn off the cleaner.
6. Water Resource Exploration Function: After startup, when the automatic robotic pool cleaner does not detect water in the pool, the power indicator light flashes and the buzzer sounds. It needs to be placed in the swimming pool within 1 minute (otherwise it will self close). When the automatic robotic pool cleaner detects water in the pool, the buzzer stops sounding, and the work indicator light and battery indicator light flash simultaneously or alternately.
7. Water Inlet Delay: After the cordless robotic pool cleaner enters the water spraying mechanism, it starts with a delay of 30 seconds, which helps the cordless robotic pool cleaner to smoothly land at the bottom of the pool without rolling during the sinking process.
8. Battery Indication Function: When the battery is full, the green indicator light flashes, and when the battery is low, the red indicator light flashes. After the sled with low battery power stops, the power red light flashes for 1 hour after automatic shutdown.
9. Adaptive Movement Speed: Cleaning will automatically adjust the movement speed based on the current terrain. It can have good adaptability for pools with a certain slope, and can minimize power consumption and extend battery life for flat pools.
Specification:
Item Type: Cordless Pool Cleaner
Main Material: ABS
Weight: Approx. 4800g / 10.6lb
Rated Power: 30W
Control Mode: Automatic
Cruise Capability: Over 110 Minutes
Rated Output Current Of Charger: 1.8A
Battery Capacity: 5000mAh, 18650, Lithium Ion Battery (Shipped With Built In Battery)
Charging Time: 2.5-3.5 Hours
Maximum Cleaning Area: 914 Square Feet (85 Square Meters)
Filtration Capacity: 3.5m3/h
Filter Density: 200um
Sports Speed: 6-18 Meters/Minute
Waterproof Grade: IPX8
Swimming Pool Water Temperature: 50 Fahrenheit ~ 95 Fahrenheit (10 celsius ~ 3 5 celsius )
Deepest Water Depth: Approx. 2.5m / 8.2ftProduct Size: 366x309x171mm / 14.4x12.2x6.7in
Storage Temperature: -4 Fahrenheit ~ 113 Fahrenheit (-20 celsius ~ 45 celsius )
Relative Humidity: less than 75percent
Purpose: Suitable For Flat Swimming Pools Or Floors, Suitable For Swimming Pools Below 914 SP/FT (85square meters)Intelligent Automatic Parking:
When the cleaning machine needs maintenance, the robot will automatically lean against the wall. Intelligent automatic parking is divided into clean automatic parking and underpowered automatic parking.
(1) Clean self service parking
When the filter system of the cleaning machine is too dirty and needs to be cleaned, the cleaning machine automatically approaches the wall, the red light of INSPECT will flash, and the green light of WORK will go out. The cleaning cycle against the wall depends on the actual cleanliness of the water tank.
Function:
A. Maximizing the actual cleaning effect of the cleaning machine and avoiding prolonged idle work of the machine.
B. To avoid complete blockage of the filtration system, it is not easy to salvage any accumulated water in the pool.
(2) Automatic parking with insufficient power
When the internal battery level is low, the cleaner will automatically lean against the wall, the power red light will flash, the WORK green light will go out, and when the battery level is below the safe value, it will automatically turn off the power.
Function:
A. Avoid serious battery loss and damage to battery life.
B. To avoid losing clean batteries, it is not easy to salvage them when parked in the sink..
Package List:
1 x Swimming Pool Cleaning Robot 1 x Adapter 1 x Accessory Hook 8 x Accessories 1 x Instruction
Note:
1. Only certified professionals can disassemble the sealing dust cover of the cleaner.2. Due to battery capacity limitations, this cleaning machine is only suitable for swimming pools below 914 SP/FT (85 square meters), otherwise it will affect the cleaning effect.3. Do not use needles or other sharp objects to pierce the shell of the cleaning machine.4. Do not allow children to ride in cleaning cars or use them as toys.5. When charging, the charging adapter must be connected to the leakage protection grounding socket.6. Ensure that the charging socket is dry before charging.7. Only original authorized power adapters can be used.8. Charging should be placed in a cool place and not covered with anything to prevent overheating and damage to internal electrical components.9. Only qualified electricians can replace adapter cables.10. When stored for a long time, please clean and wipe the cleaning agent, charge the cleaning agent with a charger, and store it in a cool place. Charging should be done every three months to maintain the battery level between 40percent and 70percent . Only original authorized power adapters can be used. If the battery is not charged for a long time after cleaning, the battery voltage will be lower than the discharge protection voltage due to the self?discharge of the battery, which may cause fatal damage.11. When using the machine, a filter must be installed to prevent debris from entering the flow channel.12. Be sure to clean the filter after use.
